Discuss Dodgy trade pictures for your amusement! - 1 Million Views! in the UK Electrical Forum area at ElectriciansForums.net
Agreed.That’s ok... if he’s coming up to a socket, for example... then sideways to another
And 'the devil may care attitude' that all WAGO lever arms are down to properly clamp the conductors safely and well.Another nice junction in the loft above a newly installed Ensuite in an extension, wiring taken care of by the Builder's "electrician".
I like the strain relief, so when someone trips over the cables on the loft floor, the Wagos will keep the cables in place.
View attachment 55410
Green/Yellow, that's why the light wasn't working"L" for bLue
"N" for browN...
Out of interest, which was the switched conductor?
DPG, I can see what you mean, however the earth stud protrudes into the box through a hole drilled in the back. The stud is bolted to the metal casing, then there is a second nut on top, which protrudes even further into the box.
I know...something's missing...
I suppose I should post this, so you can see what old stock I was using!
View attachment 56394
I know...something's missing...
davesparks and julie,
I intend to fit gland on incomer, for cable restraint ,but waiting til I fit new cable/
.
Sadly it's Men's Shed Charity and has had to close due to the coronavirus, which is a bummer.
However...
View attachment 56395
and today I have worked out how to print these labels onto standard Avery sheets!
YAY!
[automerge]1584394267[/automerge]
baddegg and static...I'm working on it!
yup, wonky! Sorry!
Pointless?
Probably!
but if I hadn't done it, someone would have complained!
next time...
You are not alone.Pointless is obviously just my opinion, but I do have a particular hatred of labels that nobody will ever read/will ignore, aren't required, state the obvious or just make a neat job look messy.
You are not alone.
davesparks and julie,
I intend to fit gland on incomer, for cable restraint ,but waiting til I fit new cable/
.
Sadly it's Men's Shed Charity and has had to close due to the coronavirus, which is a bummer.
However...
View attachment 56395
and today I have worked out how to print these labels onto standard Avery sheets!
YAY!
[automerge]1584394267[/automerge]
baddegg and static...I'm working on it!
When you combine two things, such as a spoon and a fork, it's usual to create a portmanteau such as spork (although others create it the other way around as foon).
Is it just to the right hand side out of pictureI have shown this before, can you spot the fire exit.View attachment 56401
And they say craftmanship is dead?
Is that a chair in front of it! ??I have shown this before, can you spot the fire exit.View attachment 56401
Adapt and Improvise a SAS mantra I believeAnd they say craftmanship is dead?
[automerge]1584434191[/automerge]
Is that a chair in front of it! ??
I'm still looking for a White door on a dark background.I have shown this before, " can you spot the fire exit."
Only went to change the shower.....! I see problems ahead
View attachment 56469
Only went to change the shower.....! I see problems ahead
View attachment 56469
Reply to Dodgy trade pictures for your amusement! - 1 Million Views! in the UK Electrical Forum area at ElectriciansForums.net