Dodgy trade pictures for your amusement! - 1 Million Views!

[littlespark]

I think the problem lies with aerial man pulling his cables in and friction burning through the T&E.
Send 230v down his co-ax when hes connecting the telly up... blame it on his install method

 

[DPG]

Ah, never saw the 2nd picture. Jeez, how much force did he put on that? The coax will be twice as long now!

 

[Dustydazzler]

It’s fairly easy to burn pvc cable if you pull another cable against it Too hard...
I wouldnt be happy with the burned Cable...but unfortunately It’s fairly typical to see This sort of thing

 

[DPG]

It’s fairly easy to burn pvc cable if you pull another cable against it Too hard...
I wouldnt be happy with the burned Cable...but unfortunately It’s fairly typical to see This sort of thing

Anyone who treats coax cable like that would not be fitting an aerial for me. I hate to think what his terminations are like.

 

[ChrisElectrical88]

Had to cut it either side of the joist, MF Wagobox it and put a new piece in. Pulled his cable right out the length aswell, can’t have been that hard to blast some more 10mm holes through the joists for his cable

 

[SparkySy]

Can you pop round I have a problem, thought my Plumber could sort it out but he couldn't so advised ring an electrician!

Mmm that's gone bang more than once then!!

 

[Baddegg]

Can’t have been a real plumber.....a real plumber would’ve got that to work ?

 

[SparkySy]

I was using the term loosely
It was a faulty pump apparently, that he tried to fix 3 times before giving up and getting a new one! Bet he had some Brown trousers after that!!

 

[Baddegg]

Nice to know there’s still some craftsman out there......

 

[Jim_e_Jib]

Pulled his cable right out the length aswell, can’t have been that hard to blast some more 10mm holes through the joists for his cable

The woodworm have even made a start for him!