Search the forum,

Discuss Doorbell Mystery!! in the UK Electrical Forum area at ElectriciansForums.net

W

Watty

Hi All,

I need a bit of guidance on wiring multiple doorchimes. I am working in a large house with front and backdoor pushbuttons and there are 5 no. internal 8v bells. The bell are single tone and do not differentiate between front and back doors. Im guessing the bells need to be wired in parallel with a separate tx for each bell. If so how does the push button operate the 5 bells and tx's


Any help is appreciated!!!
 
pushbuttons in parallel. in that situation i would be inclined to use wireless. use a 2 kits with 2 sounders on each, different tones for front and back.
 
You can get wired bells/ chimes 8v that have two tones one for front and one for back door.
I am having problem of finding bell/ chimes wired that has multiple tones as requested by client. Still searching ! :disappointed:
 
Yes i'm hearing what you are saying guys about a differentiation required between doors, but do you think it is possible to activate the 5 bell with one button?
 
Well,
Measure the current used by the bell, if it is more than an amp or so use a relay. If this is a big house and it sounds like a good client suggest you have a look at SAFELINK On-Line Store Products and price up various intercoms, you could explain to the client that it may be better for them and it could let them remotely release the door and so on.
 
the problem with multiple bell pushes wired in series is you would need a push that sent a different signal down the cable to identify each door,a bit like pulse code modulation,it could be done but the push would be bigger than normal to hold the circuitry.
 

Reply to Doorbell Mystery!! in the UK Electrical Forum area at ElectriciansForums.net

Similar Threads

Hello, I would liked to install a Byron wired doorbell with built in chime and 8v transformer. I'm struggling to get power source. I have a...
Replies
1
Views
492
Hi I have a mains wired doorbell with the chime in the hallway. Parents are elderly and dont hear the bell all the time. I want to run two wires...
Replies
19
Views
2K
I am planning to replace battery powered door bell with one of these mains powered sets...
Replies
1
Views
954
Hello, I am an enthusiast amateur undertaking wiring of two outbuilding under a building notice. I am soon to be subject to a first fix inspection...
Replies
5
Views
1K
I am trying to understand how a relay system works and have designed a circuit and a ladder diagram all as attached for an 8 PIN relay, a current...
Replies
14
Views
628

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top