S
sportyspice
Looking for advice/help
I have have been getting a number of faults on a G83 3600TL Powfutuer inverter, one fault that keeps coming up is“Grid Voltage Fault”
The gird voltage has
exceeded the permitted
range according to local
gird regulations.
Following causes might
lead to this error:
Grid voltage is too
high or too low at the
point of common
coupling to the
inverter.
Grid impedance at the
terminal of the
inverter is too high.
For safety consideration,
the inverter will
disconnect itself from the
grid for a short period of
time, and it will
reconnect to the grid
automatically after a
short period of time if the
grid voltage is back to
the permitted range.
Another fault that keeps happening is
“Grid Frequency
Fault”
The grid frequency has
left the permitted range.
For safety consideration,
the inverter will
disconnect itself from the
grid for a short period of
time, and it will
reconnect to the grid
automatically after a
short period of time if the
grid frequency is back to
the permitted range.
These faults are happening every day is this normal ????
I have have been getting a number of faults on a G83 3600TL Powfutuer inverter, one fault that keeps coming up is“Grid Voltage Fault”
The gird voltage has
exceeded the permitted
range according to local
gird regulations.
Following causes might
lead to this error:
Grid voltage is too
high or too low at the
point of common
coupling to the
inverter.
Grid impedance at the
terminal of the
inverter is too high.
For safety consideration,
the inverter will
disconnect itself from the
grid for a short period of
time, and it will
reconnect to the grid
automatically after a
short period of time if the
grid voltage is back to
the permitted range.
Another fault that keeps happening is
“Grid Frequency
Fault”
The grid frequency has
left the permitted range.
For safety consideration,
the inverter will
disconnect itself from the
grid for a short period of
time, and it will
reconnect to the grid
automatically after a
short period of time if the
grid frequency is back to
the permitted range.
These faults are happening every day is this normal ????