Garden install questions

[bigspark17]

I have asked the question and they are sure it just small items that will be used.

I am worried about the volt drop as the the sockets have to be run around the garden. If I ran it as a separate circuit it will have to be a 101m run in total.

If I ran the sockets from the 4 channel then I think I will get a call saying they ain't working when they haven't switched them on

If thats your biggest worry then not to much too worry about.

 

[alan132]

I spoke to them and they seem to be happy with the 4 channel to be used for sockets.

Hopefully they will remember to switch them.

 

[davesparks]

I have asked the question and they are sure it just small items that will be used.

I am worried about the volt drop as the the sockets have to be run around the garden. If I ran it as a separate circuit it will have to be a 101m run in total.

If I ran the sockets from the 4 channel then I think I will get a call saying they ain't working when they haven't switched them on

Don't worry about volt drop, just design the circuit properly and you won't have a problem.

 

[davesparks]

I am a commercial sparks that has been asked.

I don't normally do these
I install systems for machines.

So stick to installing systems for machines and let someone who knows what they are doing do this job

 

[alan132]

So stick to installing systems for machines and let someone who knows what they are doing do this job

How would you progress in the trade?

I have got some one to help me on this job.

 

[Octopus]

Is this a new circuit you are proposing?

 

[Hellmooth]

So stick to installing systems for machines and let someone who knows what they are doing do this job

Sock in it comes to mind, rarely got anything positive to say Dave.

 

[DPG]

Agree. Let's not go downhill again.

 

[alan132]

Is this a new circuit you are proposing?

My Idea was to run 2 supplies 1 for lights 1 for sockets.

But client wasn't happy to hear the fact there will be 2 swa cables on show.

Plus the sockets would be at least 100m to the last point.

So I have gone with the suggestion of using the wise box to do it all and I am scrapping the 3 socket.

 

[Octopus]

So 2 new circuits..... Part P applies

 

[alan132]

The sockets will be ran off the wise box

1 supply to the box to run lights and sockets

 

[Octopus]

Ok. 1 circuit... Still . Part p

 

[alan132]

Yes part p?
What's are you getting at?

Ip units are going in
Swa clipped to the wall
Tested
And eic issued

 

[Octopus]

Just wondering how you are planning to comply with this?

 

[alan132]

Ok then

 

[Octopus]

^^ and the answer is.......