Hi! I'm installing some interlinked smoke/heat alarms. The customer wants it so that when the alarms are activated it cuts off the power supply to his heat recovery ventilation system (so it doesn't keep trying to replace the smoke with clean air, which would effectively be fanning the fire!).
Anyone done this before? If so, how? I'm not particularly bothered which brand of alarms I fit, but the HRV system is a Regavent, if that helps.
Thanks in advance.
Anyone done this before? If so, how? I'm not particularly bothered which brand of alarms I fit, but the HRV system is a Regavent, if that helps.
Thanks in advance.