My projector screen was in storage for a few years when I tried to lower it, no go. An electrician bypassed the trigger and controller connected it to mains and the motor still works. How can I check if its the wall trigger or the controller with a multimater and how do I find replacements. I know it would probably be cheaper or easier to buy a new screen.
- Thread starter unknown
- Start date
-
- Tags
- ausie elec check controller
Discuss How do I trigger this to check the controller? in the Australia area at ElectriciansForums.net
Reply to How do I trigger this to check the controller? in the Australia area at ElectriciansForums.net
Similar Threads
Looking for counsel / guidance to replace an original Dayton On/off with speed control switch. I’ve checked with a couple local electrical supply...
I have a Firebird oil boiler that is controlled by a Honeywell timer (no thermostat) that has channels for hot water and central heating...
- Sticky
Ferrets are known for being small, resourceful, and incredibly clever. They can solve many problems by fitting into tight spaces and doing jobs us...
Hello,
Not an electrician and I currently live in an apartment building. Over the past few years I have been having abnormal problems with my...
Had a new unvented Boiler fitted as the old one had reached the end of it's life. Electrician mentioned that it might be worth replacing my fuse...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
YOUR Unread Posts
-
Is it possible to put a 16mm swa on a 40a mcb protected by an rcd
- Latest: brianmoooore
-
-
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.