Currently reading:
initial verification confusion

Discuss initial verification confusion in the Periodic Inspection Reporting & Certification area at ElectriciansForums.net

P

pauly007

Hi guys. Looking for some advice. Many thanks in advance.
during initial verification am i right in thinking that you follow the exact test procedure as stated in the regs no deviation from that list whatsoever like you can with a periodic. And with inspection again you inspect everything during construction and on initial verification ie no sampling full 100%.
 
Pretty much, all dead tests must be done before any live ones, and any deviations from bs7671 must be put correct before going on to the next test.
 

Reply to initial verification confusion in the Periodic Inspection Reporting & Certification area at ElectriciansForums.net

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock