W
WolvesJon
Hi All
Ive just in the process of doing a rewire and have been doing some circuit testing with my new megger 1710. On some circuits im getting IR readings of between 300 to 600 Mohm others and showing >999.
My questions are:
1. should I be getting >999 on all circuits as it's a new rewire or are reading of between 300 & 600 Mohm perfectly acceptable.
2. if they are not acceptable, what could be causing them
I know these readings are all way above acceptable levels, and would never have even shown up on my 1552, but i am just after a bit of clarification. The property has just been completely replastered, could the damp in the plaster be affecting the readings?
Many Thanks
Jon
Ive just in the process of doing a rewire and have been doing some circuit testing with my new megger 1710. On some circuits im getting IR readings of between 300 to 600 Mohm others and showing >999.
My questions are:
1. should I be getting >999 on all circuits as it's a new rewire or are reading of between 300 & 600 Mohm perfectly acceptable.
2. if they are not acceptable, what could be causing them
I know these readings are all way above acceptable levels, and would never have even shown up on my 1552, but i am just after a bit of clarification. The property has just been completely replastered, could the damp in the plaster be affecting the readings?
Many Thanks
Jon