- Reaction score
- 1
Performing the PAT inspection on some science equipment and I have found some items that were passed by the previous company that performed it however it failed the earth bond test and has a metal case its a air pump. upon closer inspection, I found that they only have two core wires and have had an English 3-pin plug added after receipt at the company. the box says it has to be earthed before use and there is a labeled screw on the outside for an earth point to be attached.
my question is "is there any way for these to pass a PAT Inspection and should they have been passed previously
thanks for your help
my question is "is there any way for these to pass a PAT Inspection and should they have been passed previously
thanks for your help