Make a very simple test for me

[_q12x_]

My new fv divider:

But I need a special cable that goes into fv counter, instead of those 2 (very short) wires.
Something like an osciloscope wire that is shielded is my very best guess.

I need you to tell me whats their principle and then to be able to apply it for my device here!

 

[marconi]

I thought I would report my progress in a short video clip showing a 40MHz crystal oscillator signal being divided by 100 to produce 400kHz pulse train. I assess my achievement as quite modest compared to what q12x has produced with fewer resources and I hope he will show in a short video clip.

 

[_q12x_]

@pc1966 the 74HC4060 has arrived today.
I think I buy them for greater fv reach than the 74LS293 I originally used.

 

[_q12x_]

The fv splitter is made already, so... theoretically, if I change 74LS293 in it with the new 74HC4060, should get better at reading higher fv's. Correct?