Posting a message to the forum will remove the above advertisement
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Meter Tails

Discussion in 'Electrical Forum' started by andyjc01, Feb 25, 2012.

Discuss Meter Tails in the Electrical Forum area at ElectrciansForums.co.uk.

Thread Status:
Not open for further replies.
Please make sure you checkout our forum sponsors, many do discounts for members and, they keep the forum free to use.
  1. andyjc01
    Offline

    andyjc01 Guest

    Quick question....do I need to do a test cert when upgrading meter tails from 16mm to 25mm and changing main earth from 6mm to 16mm. CCU is fine so not changing..if so what test cert.
     
  2. tony mc
    Offline

    tony mc Electrician's Arms

    I would just give them a minor works putting N/A in the areas which are not required!
     
  3. needasparks
    Offline

    needasparks Electrician's Arms

    Location:
    Essex
    I think its important to just remember what you are filling in a cert for. Its to provide proof that nessesary tests have been carried out and to satisfy what work you have done has not impaired the integrity of the installation, with this in mind it may help in your choice of cert to use and what information is required to be included next time. Normally any circuit or part circuit supplied after the point you are altering should normally be included. In your instance I would more likely do the same as Tony and just use a MWC as it would include polarity, earthing blah, blah. But be aware you are saying the existing installation is ok if you don't include/exclude anything so make sure it states that you have not fully tested individule circuits as who would be to blame if any one of those were reversed polarity, no earth etc, Just cover yourself fella.
    It would not cost much more time just to do a quick loop and martindale or the likes to random places or the next sparks along the way will wipe egg on your chin or worse. Just a thought !
     
  4. Murdoch
    Offline

    Murdoch Regular EF Member

    Location:
    Woking
    Why are you changing them if you're not changing the CU?
     
Loading...
Similar Threads - Meter Tails Forum Date
Domestic E7 boards and meter tails Electrical Wiring, Theories and Regulations Jan 12, 2019
Are my multimeters knackered?? Electrical Forum Wednesday at 4:55 PM
Thread Status:
Not open for further replies.

Share This Page

Electricians Directory Post a Domestic Job Post a Commercial Job