RussNavaraD40
DIY
- Reaction score
- 1
Hi guys, I am currently in the Philippines and with all the Islands locked down it is very difficult to get a good vehicle electrician.
I have a 2009 Nissan Navara D40 and my issue is the headlights dipped beam doesnt work. I haven't owned the truck that long so I dont know the history.
Ok, so the high beam and side lights work fine, also the front fog lights and all the other lights are all good. The front fog light symbol is always on the dash, even when the key is out of the ignition, it stays on. Not sure if this is related but it's a bid odd!
I've tested all fuses and they are all good. I checked to see if I have 12v at the front light but nothing. Today I checked the relay for the low beam, I checked it on the bench and all is good but then I checked the relay connections in the fuse box and this is where i am now confused.
I have a constant 12v at 86 + 30 and that doesnt change with ignition on/off or lights on/off. I have continuity only between 87 and battery negative and the only thing that changes when I turn ignition and lights on is that I get 4.65v at 85.
I am lost and would really appreciate some help guys.
Thanks in advance.
I have a 2009 Nissan Navara D40 and my issue is the headlights dipped beam doesnt work. I haven't owned the truck that long so I dont know the history.
Ok, so the high beam and side lights work fine, also the front fog lights and all the other lights are all good. The front fog light symbol is always on the dash, even when the key is out of the ignition, it stays on. Not sure if this is related but it's a bid odd!
I've tested all fuses and they are all good. I checked to see if I have 12v at the front light but nothing. Today I checked the relay for the low beam, I checked it on the bench and all is good but then I checked the relay connections in the fuse box and this is where i am now confused.
I have a constant 12v at 86 + 30 and that doesnt change with ignition on/off or lights on/off. I have continuity only between 87 and battery negative and the only thing that changes when I turn ignition and lights on is that I get 4.65v at 85.
I am lost and would really appreciate some help guys.
Thanks in advance.
- TL;DR
- Auto electrician needed for problem on Navara D40