Discuss Outside Light with PIR stays on permanently in the UK Electrical Forum area at ElectriciansForums.net
please do ,I would like laugh to day .I can upload pictures of the light and also the fused spur
Test mode ?
their will be blue flashing lights out side the job ,where Tele is out side laughing .I don’t think so, I’ve adjust the sensor on the front too. Not made any difference.
In other words it may be stuck in a fancy permanent on modeswitch the f/switch off and stat again ,or disconnect the pir and see if the feed is on live by switching off or on .
I could not explain any better Stanley .In other words it may be stuck in a fancy permanent on mode
..soon cured by Turning off the supply ,
Waiting 20 sec , then back on in a clean single action.
(as jiggling the power on and off multiple times is how you get into override mode )
---Or turn it off and look for signs of water
It has not got a switched live terminal and you have put the live in there instead of live in?
No. you have answered my question and counts out one cause.In the light there is just a L CPC and a N in a connector block. It’s old colours so it’s L Red, N is black and CPC is green and yellow. Or do you mean on the Fused Spur?
Some pir lights have a 4th terminal for manual over ride
Chances are you have a faulty light
Reply to Outside Light with PIR stays on permanently in the UK Electrical Forum area at ElectriciansForums.net
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.