E
eskimo39
Hi guys, used once, bought in September for a data installation and won't be used again. The tester cost £80 and the extra 8 cable run identifiers labeled 1-8 were £60. All is in brand new condition with spare battery 10 identifiers in total and a hard carry case to house it all in.
Looking for £60 delivered
FROM MAIN SPEC
Simply connect one end of your network cable to the Atlas IT and the other end to the Atlas IT Terminator and press the test button. Within seconds, the Atlas IT will analyse the full connection pattern between one end of the cable and the other end. It then instantly identifies the cable type (based on the connection pattern) and displays this on it''s easy-to-read green-mode display.
The Atlas IT now features an enhanced cable library, enabling the intelligent identification of cable configuration, such as: "Straight-Through Patch Cables", "Crossover Cables", "Token Ring Cables", "Ethernet Economiser Adapters" and many more.
If any problems in the cabling are detected, such as shorted, swapped or missing connections, then the Atlas IT will clearly identify these on it''s display, showing exactly which connections require attention.
Looking for £60 delivered
FROM MAIN SPEC
- Designed and manufactured in the UK
- Automatic identification of patch cables (straight through) & cross-over cables (PC to PC links or hub to hub links) and token ring cables
- Fault identification & highlighting for shorted lines, open lines & swapped lines
- Supplied with leads to allow testing of sockets as well as cables
- Clear, user-friendly scrollable display
- Support for up to 150 metres of cable
Simply connect one end of your network cable to the Atlas IT and the other end to the Atlas IT Terminator and press the test button. Within seconds, the Atlas IT will analyse the full connection pattern between one end of the cable and the other end. It then instantly identifies the cable type (based on the connection pattern) and displays this on it''s easy-to-read green-mode display.
The Atlas IT now features an enhanced cable library, enabling the intelligent identification of cable configuration, such as: "Straight-Through Patch Cables", "Crossover Cables", "Token Ring Cables", "Ethernet Economiser Adapters" and many more.
If any problems in the cabling are detected, such as shorted, swapped or missing connections, then the Atlas IT will clearly identify these on it''s display, showing exactly which connections require attention.