A
andyww
Morning
I need to run a spur to supply a cooker hood extractor - the only accessible point is the cooker switch - this is run in 6mm on it's own circuit from a 30amp fuse - the cooker is only 2.3kw. Can I take a spur from the feed side of the cooker point, run up to a fused connection unit in 6mm and then step down to a 3amp fuse to connect the extractor?
Thanks
Andy
I need to run a spur to supply a cooker hood extractor - the only accessible point is the cooker switch - this is run in 6mm on it's own circuit from a 30amp fuse - the cooker is only 2.3kw. Can I take a spur from the feed side of the cooker point, run up to a fused connection unit in 6mm and then step down to a 3amp fuse to connect the extractor?
Thanks
Andy