S
sparkydude
Hi All, just after a bit of advice with regards to using the following staircase timer from theben.
ELPA 7
Just need to confirm that i can wire it with two cores in parallel with no indicator lamps fitted.
It is to be used in a hospital corridor to override the timeclock when its dark inside and the photocell is holding off as the light cell outside says its still bright.
Basically just need to push retractuve switch , switch operates staircase timer set to 20 minutes then after 20 mins , goes off.
Could someone have a butchers at the diagrams as they seem to say 3 or 4 wire operation , but does not show my particular set up.
ANy help appreciated
Nick
ELPA 7
Just need to confirm that i can wire it with two cores in parallel with no indicator lamps fitted.
It is to be used in a hospital corridor to override the timeclock when its dark inside and the photocell is holding off as the light cell outside says its still bright.
Basically just need to push retractuve switch , switch operates staircase timer set to 20 minutes then after 20 mins , goes off.
Could someone have a butchers at the diagrams as they seem to say 3 or 4 wire operation , but does not show my particular set up.
ANy help appreciated
Nick