- Reaction score
- 771
Thing is you are not allowed to run control across 1ph & N either.
Discuss Start stop switch in the Electrical Wiring, Theories and Regulations area at ElectriciansForums.net
Thing is you are not allowed to run control across 1ph & N either
Would you mind elaborating a bit further please Paul, as this is intersting stuff
If I can find them I'll dig out some of my old (2000) loop etc drawings and scan them if you want.
Would you mind elaborating a bit further please Paul, as this is intersting stuff
Please if you don't mind, I did some control and interlock wiring (with drawings), and Iam sure on that occasion it was all 24 Volt stuff, and mechanical interlocks (both cable and castell keys), I do have a BS document somewhere about E-stop circuits.
Thanks
We seem to be heading off at a tangent as usual. There is no mention from the OP of the control voltage!
We seem to be heading off at a tangent as usual. There is no mention from the OP of the control voltage!
And I think he was more interested in starting the motor rather than stopping it
Reply to Start stop switch in the Electrical Wiring, Theories and Regulations area at ElectriciansForums.net