V
Volt
Hi,
Initially not sure of where to put this post as it touches more that one forum.
Grateful for your help please with an unusual installation.
I am looking to avoid long runs of hot water from the combi to the launderette due to being on a water meter and to run the taps until hot water is ejected is wasteful.
I am thinking of tankless undersink instant water heaters that heat up the cold supply at the tap but at 3kw can be spurred into the ring main. However, they only achieve about 1.2 litres per minute for a 30C temperature rise.
Grateful for your views/considerations on wiring up two such heaters in parallel to achieve either 2.4 liters per minute or a 60C rise at 1.2 litres per minute. This would pull 6KW of the ring main approaching shower teritory. However is the same as running say three 2KW fan heaters in different rooms off the same ring? The heater manufacture is OK with feeding one heater into the other but I am unsure of the electrical supply issue.
Initially not sure of where to put this post as it touches more that one forum.
Grateful for your help please with an unusual installation.
I am looking to avoid long runs of hot water from the combi to the launderette due to being on a water meter and to run the taps until hot water is ejected is wasteful.
I am thinking of tankless undersink instant water heaters that heat up the cold supply at the tap but at 3kw can be spurred into the ring main. However, they only achieve about 1.2 litres per minute for a 30C temperature rise.
Grateful for your views/considerations on wiring up two such heaters in parallel to achieve either 2.4 liters per minute or a 60C rise at 1.2 litres per minute. This would pull 6KW of the ring main approaching shower teritory. However is the same as running say three 2KW fan heaters in different rooms off the same ring? The heater manufacture is OK with feeding one heater into the other but I am unsure of the electrical supply issue.