Posting a message to the forum will remove the above advertisement
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Discuss TV/Network Cabling(First Fix) in the FreeSat, Sky, VirginMedia Forum area at ElectrciansForums.co.uk.

Tags:
Please make sure you checkout our forum sponsors, many do discounts for members and, they keep the forum free to use.
  1. DefyG
    Offline

    DefyG Regular EF Member

    Location:
    South East
    Hi All,

    Electrician, not TV/Sat Engineer.
    Currently in process of first fixing new build and client has asked us to install cables (first fix) for TV positions.
    Have previously installed 2No coax and 2No network cables (more recently Cat6) to each point for the 'now' and some degree of 'future proofing'.

    However, with the likes of Sky Q (Wireless) and Sky's decision to transmit via broadband in the future, what would you recommend to install now?

    Cheers
     
  2. GeorgeCooke
    Offline

    GeorgeCooke Regular EF Member

    Location:
    UK
    It is really a job for a TV/satellite engineer. But you need 3 coax for each TV position (2 for satellite and one for aerial). Ideally they should run to where the dish and aerial will be fitted or perhaps curled up in the loft with plenty of length. Use decent sat grade 100 type cable.

    Don't worry about Sky Q, the client might have Freesat. Sky won't be transmitting via broadband any time soon, there is just not the infrastructure for everyone to receive it like that.
     
  3. Charlie_
    Offline

    Charlie_ Electrician's Arms

    All depends on each clients individual needs..
    Definitely go fo 2 0r even 3 x cat6..
    This will give you options for hdmi, audio, and network instead of WiFi..
    CoAx can still be useful for freeview but not really necessary
    But all depends on each spec and budgets.. whether a matrix is being utilized, audio system, etc
     
  4. littlespark
    Offline

    littlespark Electrician's Arms

    Location:
    Scottish Borders
    Sky Q still needs the twin co-ax from the dish, also co-ax from aerial for freeview.

    Got to think of any future changes customer may make.

    I made the mistake of not having an aerial feed when I had an extension built, so dont have the option of Freeview. Sky comes in from outside.... I did run a telephone line and 3 x cat6 from BT hub position for the Sky+ at the time, smart tv and xbox.

    Second mistake I made was not taking into account my wife changing her mind as to which corner the TV was going to sit in:mad:
     
    • Funny Funny x 2
  5. Charlie_
    Offline

    Charlie_ Electrician's Arms

    I tend not to do the sky cables as they like to pull the subscribers pants down for the install regardless of whether cables are in place or not
     
    • Informative Informative x 1
  6. Welchyboy1
    Offline

    Welchyboy1 Electrician's Arms

    Location:
    Essex
    First thing you need to do is have a talk to the customer and see exactly what he wants

    Its alot easier than working with ifs, buts and maybe's

    Installing 'tv points' can mean a half a dozen different requirements in this day and age
     
  7. 45140
    Offline

    45140 Regular EF Member

    Location:
    Midlands
    Remember that you do not need a SKY Engineer to do anything at all. There are plenty of independent installers.

    Also be wary of splitting cables. The standard now is to have two cables for each TV point. You need to ensure that you have a dish with the correct number of LNB fittings, general they normally install a four point LNB (two cables to living room and two cables to upstairs bedroom. If you want more points then you need more LNB. You only need 2 LNB connections if you want to watch and record different channels at a set top box. If you do not want that facility in any other room then you can get, say a LNB with six terminals, two for living room and then the remaining four can feed other rooms. If you DO want the capability to record one channel and watch another in each room, you would need an LNB with terminals for a three-bedroomed house.

    The bigger question is that SKY and Virgin are moving away from wired systems to a single connection point with a set top wireless signal router that will allow you to watch in a different room wirelessly, so rather than future-proofing you may be installing unnecessary wiring.
     
  8. GeorgeCooke
    Offline

    GeorgeCooke Regular EF Member

    Location:
    UK
    Sky do not use engineers for this. They are installers.

    No you can't, standard LNBs come with 1, 4, or 8 outputs.
     
  9. 45140
    Offline

    45140 Regular EF Member

    Location:
    Midlands
    Thank you for the clarification. I was told by someone who does that work that there are 6 output LNB - which are advertised- the first two outlet being for SKY Q and the remainder for the multi-room or set top box.
     

Share This Page

Electricians Directory Post a Domestic Job Post a Commercial Job