Discuss Veritas R8 - Disable PIR in the Security Alarms, Door Entry and CCTV (Public) area at ElectriciansForums.net
Thanks for information. What would linking out the alarm contact in the PIR require me to do?The easiest way would be to link out the alarm contact in the PIR
Alternatively factory default the panel and then reprogram it
The PIR will have three pairs of connections which are power + & -, tamp or tamper and alm or alarm if you put the 2 cables in the alarm connections together in one connector this will link out the PIR and once the lid is replaced if you reset the panel then you should be able to set it normallyThanks for information. What would linking out the alarm contact in the PIR require me to do?
Thanks. So just join the two alarm cables together (red and black in this picture). Sorry for several questions - want to make I don't do anything foolish!The PIR will have three pairs of connections which are power + & -, tamp or tamper and alm or alarm if you put the 2 cables in the alarm connections together in one connector this will link out the PIR and once the lid is replaced if you reset the panel then you should be able to set it normally
Thanks for your help, it's much appreciated.Yes to join them just put both cables in one of the alarm terminals
Tried this today. Sadly did not fix issue. One PIR has red LED constantly on and alarm will not set (unless omit the zone when setting it). Do you have any other suggestions?Yes to join them just put both cables in one of the alarm terminals
Reply to Veritas R8 - Disable PIR in the Security Alarms, Door Entry and CCTV (Public) area at ElectriciansForums.net
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.