Evening
What ref method would you give t/e running the web of a posi joist?
100mm insulation below the posi joist then a MF and plasterboard ceiling below that
Cable not touch insulation
Cable touching:clipped to posi joist
I think I have a better understanding of this now!
So on the driver it will state a input current (so for the drivers in hand it is 0.15a) (this is the AC side- which the dimmer is concerned with)
I have 6x drivers so a total of 0.9a- so I should be under the Lutron RA2 inline dimmer max limit...
This week I nearly learned a hard lesson re this!! (using a Lutron RA2 inline dimmer to control 6x 700ma 13w LED fittings)
https://www.lucent-lighting.com/site/assets/files/6952/2605-cb-tl-1.pdf
So I thought 6x 13w=78w- thats fine its well within Lutrons stated 150w of LED load.
But after having...
Afternoon
An internal swimming pool (recessed into the concrete floor of a basement in a domestic house)
The pool has a metal frame
However all pipes feeding the pool are plastic
Am i right in thinking I do not need to bond the metal frame as it is not a extraneous metal part ?
nor do I...
some of the circuits will be three phase- like car charger, GSHP, ASHP etc
should you only divdide 189/3 if all circuits are single phase?
Am i right that the swa from kiosk to house (40m through underground duct) so ref method D for three phase cable:
Will need to be 150mm 4c with a 120mm...
Can i scratch your head (bare in mind biggest i have done is 25mm 4core ?)
I am tendering for a big house new build
I think they already have 100tpn
(But in a kiosk 40m away from house)
And i think they are doubting its big enough now (they sent max demand table below)
So they are asking for...
Evening
Been asked to light up a road hoarding covering a skip for soil of a basement dig- not done this before.
Am I correct in thinking it is common practice to just take 110v builders lights over to it- rather than taking 230v over a public pathway!
Thanks
J
Morning guys
I am doing some new build flats that qualify for zero rate vat. So I am charging vat at zero % to the main contarctor.
However I have a lad working for me (labour only) on the job but he is VAT regiestered. I deduct his CIS from his invoices to me. Do I pay him vat or should he too...
dont think that will work in my situation??
that switch says 100-230v? i am trying to switch 12v
also your switch looks like it needs 3core going to window (O,C,N)
I do no have this- i just have a +&- from window 1 to a cupboard I have 230v in and same for a 2nd window
So after a 230v to 12v...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.