Recent content by Marvo

  1. Marvo

    Help with an external extractor fan

    Maybe you could use an in-line mixed flow fan which will be quieter and more efficient than an axial. This one is an S&P which is a good make and it has different speed options. There's also cheap nasty versions available but it depends on customer budget I'd personally avoid them....
  2. Marvo

    no access to db

    To be honest I would see this as the perfect opportunity to buy a new tool such as an odd shaped spanner or screwdriver to access the door hinge fixings. Are you sure the door can't be inverted and installed in either direction, most DB's allow this. If not and if you can't remove the door...
  3. Marvo

    Medical Question

    I wish it was only electrical tools but alas not. Recent purchases include a cordless vacuum pump that can pull a 10 micron vacuum, a second hand gebrit press tool for p;lumbing and 18 inch heamostats....just because
  4. Marvo

    Medical Question

    Let us know the results of your Elex test. Good luck.
  5. Marvo

    Medical Question

    I have a medical problem. I can't stop buying tools. If I see a well engineered or well manufactured tool I can't help buying it. It doesn't matter if I know I'm never going to use it. It doesn't matter if I already have a good working version of the same tool. It doesn't matter if I can't...
  6. Marvo

    Help with an external extractor fan

    That fan looks like it's bi-directional and maybe speed controllable as well. what's the application? Is it just for extraction in that room?
  7. Marvo

    dismantling Air con in commercial setting

    It would need 'pumping down' whereby one valve is closed at the outdoor unit and it's run untill all the gas is pumped into the receiver and then the second valve is closed. It would then be in the state it was originally shipped by the manufaturer before installation with the gas charge...
  8. Marvo

    hand tools when your old and falling apart

    I'd second both of these suggestions. Vessel make very good screwdrivers and the ball grips are easy on the hands although the range is limited. I also use the Bosch GO2 (avoid the original Bosch Go) and it's pretty good with the variable torque setting and obviously you can use any make and...
  9. Marvo

    C.K VDE Interchangeable Slim Bladed Screwdriver Set

    I wouldn't get too concerned about VDE ratings, it's mostly a sales pitch so manufacturers can profit more. VDE is just the name of an independant certification agency who declare that a tool complies with the tool definitions outlined in the IEC-60900 standard for insulated tools. Firstly as...
  10. Fully ins.jpg

    Fully ins.jpg

    • Marvo
    • Media item
    • Comments: 0
    • Category: Electrical Tools and Products
  11. Hybrid.jpeg

    Hybrid.jpeg

    • Marvo
    • Media item
    • Comments: 0
    • Category: Electrical Tools and Products
  12. insulating.jpg

    insulating.jpg

    • Marvo
    • Media item
    • Comments: 0
    • Category: Electrical Tools and Products
  13. Marvo

    C.K VDE Interchangeable Slim Bladed Screwdriver Set

    I have a draper expert torque screwdriver kit and the bits are kinda interchangeable with my wera set. The hex size of the shafts are the same so they fit nicely but if you put a draper bit into the wera handle it does fully lock but it can be pulled in and out by about 5mm. If you put a wera...
  14. 1713953511098.jpg

    1713953511098.jpg

    • Marvo
    • Media item
    • Comments: 0
    • Category: Electrical Tools and Products
  15. 1713953671305.jpg

    1713953671305.jpg

    • Marvo
    • Media item
    • Comments: 0
    • Category: Electrical Tools and Products

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

Tags

advice aus cable circuit course earth electric electrical electrician hello led light lighting lights looking new please question rcd socket supply switch testing training wiring
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
TilersForums.co.uk | UK Tiling Forum - Est 2006
Electrical Forum for Electrical Advice
Electrical Advice
DIY Advice
Tile Cutters
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock