yeah thanks....Ive checked the cct diagram,,and im guessing ill need a starter...which wasnt required on the old faulty
arlen ballast which iguess was electronic......might just get a SIMILAR REPLACEMET,,,r
need to change faulty ballast to new helvar 58.
not sure of connections as new unit has only four outlet connections don't want to be zapping anything?
old unit (arlen 170) which btw was wrong unit has l.n.e. input and similar 4outlet terminals which feed each
end of the fluro tube
i have to provide smoke detectors to the flat above the shop (1) and 3 in the shop itself.
im going to fit a wireless one in the flat.. so am i right in saying only one in the shop needs to be wireless
if i hardwire the other 2? or will i have to fit all four the same..??:dunce2:
i asked it...several minutes later a large van turned up and 2 guys wearing what looked like white dust coats jumped out and took me away. i did notice the neighbours curtains moving as we left.
while im on here maybe someone can advise... sometims my van refused to start..doesnt fire
not long before the battery dies...
one day i noticed the glow plug dash board light not lighting ...so a quick check of the fuses/wiring to relay etc
moving the loom around the light came on...so im...
Called out because the Honeywell digital timer(does ch & hot water)
blew up!! They've recently had a new combo boiler fitted.. Which is temporarily connected to
a supply but the timer etc has been left disconnected!!
Plumber thought there may be a faulty/damaged cable, But no breakers/RCD...
Ok, cable under floor. 16m run. My calcs say 6mm tne
Is adequate although on the limit. I don't want to run 10mm unless I absolutely have to
Am I correct?
You have my sympathy...some builders only have one thing in mind ..do their bit get paid and sod everyone else..probably bragging in their pub after 16 pints "how they screwed the sparky" on their latest job.i had a kitchen ceiling with 16 d/lighters...and knowing how women can change their...
on this issue... Some of the stainless steel dog baths have an electric motor to elevate them. this is controlled with foot pedals...the 13amp plug comes on a 2m flex...!!!
in this instance im going to feed this into the adjoining kitchen and term on a 13 f/s outlet.
:xmas: it aint that...its the fact the customer has to pay for the upgrade....and if it involves a new board and full test
all existing ccts then its gonna cost them more. i havent got to pay for any of it.
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.