Update:
I stripped everything down again and put it back together, but this time with the brush holders clear of the commutator.
I can see now that the brush holder fouling the armature was the root of the problem, as with the brush holders back (with new brushes), the armature spins freely...
I have just been in the garage and messed about with the motor a bit more.
I discovered two things:-
1) if I take the armature out and turn on the power, there is no short, or it is not apparent - the fuse does not trip. Is that to be expected? I also put a multimeter on the armature and...
Hi Folks,
Me again.
To save anyone spending their valuable time answering my questions, I've decided to go ahead and buy a new motor.
If nothing else, this exercise has revealed to me:
a) there's no such thing as a real bargain;
b) if I'm having to ask questions like this, I probably...
Here's an update, I am pretty sure everything is wired as it should be. I have checked all the connections and they seem to be ok. The capacitor is around 30mm x 20mm x 6mm. It says on it 0.33mF K X2 and under that MEX GPF 40/085/21/C 250v~ 275v~.
Now I reassembled everything, the motor...
Thank you for the kind welcome!
If only there were any available info about this motor. It is a SIP 01930 table saw. The motor has no plate on it at all. It is made in China to a low budget;)
I will try to take some photos to show what I am talking about.
Best regards
Steve
Hello everyone,
This is my first post, so please bear with me. I am trying to work out how the motor to my table saw is wired. I bought it second hand and I think the previous owner has messed with it. One of the brush holders had been forced in and was touching the commutator. I am wondering...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.