I just installed a 4th brake light on my 2014 scion frs wired thru my tail lights. The moment I hit the brakes my abs and traction control lights turn on. I thought of installing 1way diodes to stop reverse flow of curent do you guys think that may work? Or is there something else I should do?
Search the forum,
I'd fix the fault rather than trying to bodge it with diodes. What is the reason for keeping on changing the lamps?
Discuss abs and traction control on after 4th brake light install in the Auto Electrician Forum area at ElectriciansForums.net
- Reaction score
- 16,758
I'd fix the fault rather than trying to bodge it with diodes. What is the reason for keeping on changing the lamps?
- Reaction score
- 5,868
Does everything revert to working properly if you disconnect the additional lamp?
- Reaction score
- 16,758
Sorry, just realised you are adding an extra light. As Brian says, what happens when you remove it? And remember with modern wiring systems (ie CANBUS), it's not always as easy to just make changes.
What's the reason for wanting a 4th brake light out of interest?
What's the reason for wanting a 4th brake light out of interest?
Reply to abs and traction control on after 4th brake light install in the Auto Electrician Forum area at ElectriciansForums.net
Similar Threads
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.