Discuss Conversion of 3 ph. to single phase lesson in the UK Electrical Forum area at ElectriciansForums.net

Rather than move house we had our house adapted for my disabled wife. The electrician who did the wiring used our home for his annual inspection with NICEIC. My office is only a few metres away from the consumer units. I overheard the inspector remark that there is a tightening up on the requirement to adequately secure cables such as meter tails, especially ones which can 'flap in the breeze' as vortigen's image shows. The worry being that repeated movement of the cables - as might be the case under our stairs as the hoover is put in and taken out - will loosen the connections. Hearsay but others might confirm. I don't know the regulation number.
 
I overheard the inspector remark that there is a tightening up on the requirement to adequately secure cables such as meter tails, especially ones which can 'flap in the breeze' as vortigen's image shows... I don't know the regulation number.
Agree - this has never been ok in my humble opinion. Regs that come to mind are 134.1.1 (good workmanship by skilled persons using proper materials), 522.8.4 (adequate cable support for own weight) and 522.8.5 (adequate cable support so no mechanical strain on terminations). This last one 522.8.5 has a note added in the 18th to spell out that CU tails are included here, probably what sparked (!) the discussion :) .
 
Last edited:

Reply to Conversion of 3 ph. to single phase lesson in the UK Electrical Forum area at ElectriciansForums.net

Similar Threads

Hello all, I signed up here for a little help. I bought a 3 phase bandsaw and went down the rabbit hole of VFD’s etc. ‘The motor is 3 phase 400v...
Replies
9
Views
1K
Hello Everyone -- So, I am looking to buy a used 5HP 3PH 208 V 10 inch Table saw --- (Motor Plate Data in Image) I am a DIY'er and in...
Replies
2
Views
559
hi guys / girls , any advice would be appreciated, So the situation is a domestic property has a 3 phase supply , from the service head we have 3...
Replies
1
Views
316
Hi, searched the forum but cant locate anything similar so apologies if ive missed something. Ive got a new hob to install in the kitchen...
Replies
5
Views
1K
Good morning, So I’m working on an existing 3 phase solar system and the customer wants a way to use the huge mass of exported solar on their...
Replies
3
Views
998

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock