How to get wire back into connector

[Dan2394]

Hi,
I have accidentally pulled a wire out of connector (believe it is a molex?)
I have seen info about getting the metal part out of the connector but only if the wire is still attached.
Is there any way I can get the metal part out so I can reattach the wire?
Thanks

 

[mainline]

View attachment 112304View attachment 112305View attachment 112306Hi,
I have accidentally pulled a wire out of connector (believe it is a molex?)
I have seen info about getting the metal part out of the connector but only if the wire is still attached.
Is there any way I can get the metal part out so I can reattach the wire?
Thanks

There's a tool that slips down each side of the pin.

molex pin removal tool - Recherche Google

 

[Avo Mk8]

As per mainline
Once you get it out you will either have to solder the repair, or obtain a new 'pin' and a crimp tool to crimp it.
I came across this video, not the clearest, but hopefully you get the idea:

Other option is to pull the corresponding wire out of the other half of the connector, and use a crimp to join the wires, unless it is vital to be able to disconnect the two halves. Or use a suitable Wago for this wire??