Discuss Make a very simple test for me in the UK Electrical Forum area at ElectriciansForums.net
Vcc at 5V and 0V go to pins 14 and 7 respectively - but you knew that - just wanted to be careful.Ive redrawn your circuit, to make it clear (for me).
This is not actually simulating anything, I use it just for drawing (and clarifying).
I think I get you now, thank you for it !!!
View attachment 97759
+7V(Max) Vcc to pin4 and gnd to pin 11.Vcc at 5V and 0V go to pins 14 and 7 respectively - but you knew that - just wanted to be careful.
Nice to see proper resistor symbols have fund their way into this thread!
It was to make it easier for pen plotters in the early days of CAD drawings I believe. Now it is slightly irrelevant.a meaningless rectangular box was foisted upon us by some committee or other.
Reply to Make a very simple test for me in the UK Electrical Forum area at ElectriciansForums.net
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.