- Reaction score
- 51
1 Way, Switch up is PIR and Switch down is perm on
Can someone explain how would the 2 way would work and is the drawings correct the load cable for the lights is from PIR as easier than wiring from switch thanks
Discuss Manual override and PIR on lights in the UK Electrical Forum area at ElectriciansForums.net
Thanks I take it 2nd picture is not correct?The first drawing is simply an override of the sensor. The live to the sensor is always there and will always work.
The second drawing has an isolator for the live so there is a way that the sensor will not work at all.
2 gang switch, not 2 way. That’s something different.
So my first drawing just with a 3 position switch?Would be easier to just use a 3 position switch so you could have the lights on sensor, lights off or lights on
Yes for a 3 position switch not 2 gangI put it on your last post
Reply to Manual override and PIR on lights in the UK Electrical Forum area at ElectriciansForums.net
We use essential cookies to make this site work, and optional cookies to enhance your experience.