Discuss No access in the UK Electrical Forum area at ElectriciansForums.net

Hi Chris, the DIY forum is opt-in only so the only people with access are the DIY'ers themselves and the experianced members who've expressed an interest in assisting them. I've posted a thread in the staffroom for debate on whether it would be a good idea or not to allow trainees DIY forum access. You're the first trainee to request this as far as I now so we'll discuss it and get back to you in a day or two.
Thanks for the reply marvo, it's not of big importance, like I said I didn't actually know it was the diy section the post was in, on my app it didn't show the section and I knew from the post it was not the arms so if trainees can't have access to that section which I didn't know was the case that's fine by me :)
 
Hi Chris,your manners,politeness and apparent willingness to learn have prompted my response...no,i'm not after a dance partner :bow: but if you were going to invest a few quid in books,and good books ARE an investment,i can wholeheartedly recommend any by messrs Scaddan and Kitcher. Do not be tempted to believe that such books are only for use during the build up to a,say,an end of module test or similar,just having them about for reading generally,when bored,on lavvy or train,and you will be surprised when the information you will inevitably retain,will ooze back out. I have lost count of the times,what i have gleaned from a "bog-book",has gained myself a minor advantage on a job,or in a conversation...like the gent who wandered into the workshop i was working in,and bet that out of eight of us,no one knew what a "jim crow" was...not guessing that one of me favourite relaxing reads is a 1947 Buck and Hickman catalogue...:stooge_curly:
 
Hi Chris,your manners,politeness and apparent willingness to learn have prompted my response...no,i'm not after a dance partner [emoji144] but if you were going to invest a few quid in books,and good books ARE an investment,i can wholeheartedly recommend any by messrs Scaddan and Kitcher. Do not be tempted to believe that such books are only for use during the build up to a,say,an end of module test or similar,just having them about for reading generally,when bored,on lavvy or train,and you will be surprised when the information you will inevitably retain,will ooze back out. I have lost count of the times,what i have gleaned from a "bog-book",has gained myself a minor advantage on a job,or in a conversation...like the gent who wandered into the workshop i was working in,and bet that out of eight of us,no one knew what a "jim crow" was...not guessing that one of me favourite relaxing reads is a 1947 Buck and Hickman catalogue...:stooge_curly:
you should work for lucien lol.

ill have a look at those books though
 
Hi Chris,your manners,politeness and apparent willingness to learn have prompted my response...no,i'm not after a dance partner [emoji144] but if you were going to invest a few quid in books,and good books ARE an investment,i can wholeheartedly recommend any by messrs Scaddan and Kitcher. Do not be tempted to believe that such books are only for use during the build up to a,say,an end of module test or similar,just having them about for reading generally,when bored,on lavvy or train,and you will be surprised when the information you will inevitably retain,will ooze back out. I have lost count of the times,what i have gleaned from a "bog-book",has gained myself a minor advantage on a job,or in a conversation...like the gent who wandered into the workshop i was working in,and bet that out of eight of us,no one knew what a "jim crow" was...not guessing that one of me favourite relaxing reads is a 1947 Buck and Hickman catalogue...:stooge_curly:
Thanks you very much for the recommendation, I will look into them now, all I have at the moment is basic electrical installation level 2 by t lindsey, we used that when doing evenings doing the 2365
I also have the blue advanced one (future book) ;)
OSG
and a calculations book

Enjoy the rest of your weekend
 
Last edited:

Reply to No access in the UK Electrical Forum area at ElectriciansForums.net

Similar Threads

I hope this is the correct thread. I have to replace the main oven selector switch in a Smeg A4-5 cooker. I can't find a proper service manual...
Replies
0
Views
481
Good Morning Does anyone know a webpage or site where I can consult the electricity BS? Currently I am able to access the NFPA standards but...
Replies
4
Views
658
Hi there...seeking some advice on an issue for our local little league. I run the facilities... (NOTE: I will not be performing the work here...
Replies
0
Views
681
I need to handle power failure for my electric strikes in my house. Of course, I can leave the keyed entry on the knobs, but what if I wanted to...
Replies
8
Views
869
Hi everyone, I've got an electrical ring circuit that looks somewhat like the drawing below, where the blue sockets are part of the main ring and...
Replies
2
Views
1K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock