cannonball35
DIY
- Reaction score
- 6
Hello,
Looking for guidance on a flush mount light replace. The current setup is I have two light switches on the opposite end of the wall. The two switches control two lights. I replaced one of the lights and when I turned the breaker on the lights come on, but the switches are off. If I flip one of the switches to on the light goes off. Previously this was never the case. When both switches were off the lights were off. The light fixture had two black, two white, two ground wires. I connected the black to black, white to white, and ground to ground. Any feedback on the light being on when the switch is off?
Looking for guidance on a flush mount light replace. The current setup is I have two light switches on the opposite end of the wall. The two switches control two lights. I replaced one of the lights and when I turned the breaker on the lights come on, but the switches are off. If I flip one of the switches to on the light goes off. Previously this was never the case. When both switches were off the lights were off. The light fixture had two black, two white, two ground wires. I connected the black to black, white to white, and ground to ground. Any feedback on the light being on when the switch is off?