- Reaction score
- 520
What would be the easiest way of explaining statutory regulations and non statutory and what is the difference
- Thread starter Farmelectrics
- Start date
Discuss Reqs in the Electrical Wiring, Theories and Regulations area at ElectriciansForums.net
Share this page
- Reaction score
- 12
Statutary is Law
Non statutary is not
Non statutary is not
OP
- Reaction score
- 520
Thanks scot
Reply to Reqs in the Electrical Wiring, Theories and Regulations area at ElectriciansForums.net
Share this page
Similar Threads
Can you feed a consumer unit from another consumer unit, It would be supplied by a non RDC protected MCB. Is this allowed as I have always seen...
Good afternoon legends,
Just after some advice on what the title suggests really as I don’t do much data work.
I’m about to start a garage...
JIB Electrotechnical Certification Scheme (ECS)
Current from 5A to 200mA
Hi, can I ask you what is the easiest way to make from 5A 200mA, in my voltage source??
thx for your help
Hi all,
Looking at this again…
As most now know the industry is spit on EV Charging and Pen fault detection!
Given there is no standard for...
I live in the UK and have a switch box that I'd like to replace, but it seems to have non-standard screws, closer to the center than what I can...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.