Round conduit box lids.

[Chris1234]

Evening, is there a place to get good quality 20mm round plastic conduit lids?
I’ve installed a load this weekend from Screwfix and they don’t seal correctly as the plastic is too thin.
I’ve ended up using two lids on each box!

Thanks.

 

[ipf]

Call in another wholesalers and see if theirs are any better. Plastic lids are ten a penny....they sound like a hundred...….or in your case fifty a penny

 

[Pete999]

Evening, is there a place to get good quality 20mm round plastic conduit lids?
I’ve installed a load this weekend from Screwfix and they don’t seal correctly as the plastic is too thin.
I’ve ended up using two lids on each box!

Thanks.

Get some rubber gaskets to go with the lids

 

[Squid]

You need a better quality lid which are usually thicker or use metal lids and a rattle can of white paint ;o))))

White PVC Box Lids - https://www.tlc-direct.co.uk/Products/MTLID.html

 

[Deleted member 9648]

Centaur lids have a built in 'seal'....and fit as well as any other brand.

 

[Chris1234]

Thanks, they have a rubber seal, but they seem to be tightened too much when you buy them. The screw hole is slightly lower than the level of the outside rim so they are bent outwards in between the screw holes.

 

[brianmoooore]

Centaur lids have a built in 'seal'....and fit as well as any other brand.

The one item I buy from CEF!

 

[Chris1234]

Thanks for the above.

After 5 weeks all the screws are rusty as well

 

[ferg]

I use Marshall Tufflex (I think.) With separate rubber gaskets and brass screws.

Not the cheapest way to do it but it works for me.

 

[brianmoooore]

The one item I buy from CEF!

And always fitted with M4 x 8 brass screws.
Swap the screws on the saddles for stainless as well.

 

[Strima]

Thanks for the above.

After 5 weeks all the screws are rusty as well

Brass screws are the way ahead.

 

[Toneyz]

Ours come from either Electric Centre or Edmundson which are MK and have no problems with them.

 

[Deleted member 26818]

Marshal Tufflex lids are pretty good, though they don’t work well with rubber gaskets.
They have a raised boss around the inside which locates the lid in the box, but prohibits using gaskets.

 

[ferg]

The gaskets I use are the full size of the box and I can't say I've noticed an issue.

I'll double check the brand of lid in the morning.

I over ordered a year or so back so have squillions of the damned things.

 

[Deleted member 26818]

The gaskets I use are the full size of the box and I can't say I've noticed an issue.

I'll double check the brand of lid in the morning.

I over ordered a year or so back so have squillions of the damned things.

The ones I’ve used have 2 spikey bits sticking out to locate over one of the screw lugs in the box as well.

 

[Charlie_]

Never had an issue, get the boxes, get the lids/gaskets, brass screws - happy days..
Where did you buy your gear from?

 

[Squid]

Reminisces about 2BA Brass round heads...........

 

[Charlie_]

Whitworth, the granddaddy of them all

 

[Chris1234]

Never had an issue, get the boxes, get the lids/gaskets, brass screws - happy days..
Where did you buy your gear from?

Screwfix, never again.

Thin conduit lids that bend before they are tight and let in water, and screws that’s gave badly rusted in 5 weeks.
The lids have delaminated as well.

 

[Charlie_]

Wow that sounds terrible, I’ve only ever used MT and Centaur..
What make do screw fix sell?