I have just started installing temporary emergency lights for a fire alarm company i work for i am an electrician qualified to the 18th edition i do not currently do testing and inspection looking at doing this in a few months. Just looking for some advice and information about the testing of emergency lighting circuits once it is installed as i do not normally install emergency lighting.
I have installed 5 emergency LED bulkheads which comes from a key switch, the feed comes from the DB which is connected into the rcbo of the circuit feeding the normal lights so when it trips the lights will come on.
Can some one explain to me which test would have go to be carried out to ensure no damage to the LEDs
I have tried to ask another electrician that's doing to testing but not interested in explaining it to me
I have installed 5 emergency LED bulkheads which comes from a key switch, the feed comes from the DB which is connected into the rcbo of the circuit feeding the normal lights so when it trips the lights will come on.
Can some one explain to me which test would have go to be carried out to ensure no damage to the LEDs
I have tried to ask another electrician that's doing to testing but not interested in explaining it to me