Hi Dave,
Ive taken a screenshot of the work that needs doing, do you recommend doing an MEIWC for each? the thing I've seen done before is someone using literally a home printed excel worksheet that looks like the 'section A - Observation' page and fill in the ones they've rectified and just put...
I do work for some housing agencies that expect you to churn out as many EICRs in a day as possible.. telling them that the guys they have must be skipping over details or not testing things at all they just say "well its passed all the relevant tests" I just laughed... it takes me a good day to...
Hi, just been called to do remedial work on a electrical installation condition report to correct some C2's.
My question is, is there a form or document I can give to note down the C2's I've corrected?
Thanks in advance,
Marky
A little more info mum intends to have it hard wired and spurred off a Economy 10 socket so when that kicks in the storage heater comes on overnight and automatically goes off in the morning. Thanks!
Thank you for that info. So if i'm not intending to use a programmer then i can just connect the black cable to a connector block and leave it unconnected?
Thanks again for the help.
Yes that would help wouldn't it haha I just fitted the two Dimplex ones as they were straight forward and took a look at the third one and told her I'll do it on the weekend once i figured out what the fourth wire was for.
Thanks all!
She has two Dimplex storage heaters but these have the standard 3 coloured cables, which I connected up easily easily enough. However the other isn't a Dimplex storage heater it has the temperature dial at the top of the heater to adjust the temperature, so I don't quite understand what the...
My mum bought some storage heaters with in built thermostat and I noticed there were 4 wires, live, neutral, earth and a black cable. I've wired storage heaters before and they didn't have this 4th black cable. How is this 4th cable wired? She has Economy 10 in the house is it possible to wire...
I'm going back tomorrow evening to have another try this time disconnecting all Live-Earth conductors from behind the sockets and doing individual IR tests along each hopefully to find the problem. I had thought about joint boxes under the floors, my mate bought the house of a guy who had bought...
Hi everyone, did some insulation testing on my mates house as his RCD was tripping manage to isolate it to the ring circuit, Live-Earth for the ring circuit came to 0.01Mohms and all appliances have been disconnected and removed.
However I have disconnected the Live-Earth behind one socket...
I don't doubt that, I asked to see the technical schedule and specs all they could give me were drawings of the floor plan, if he didn't skimp and use these cowboy wiremen he wouldn't be in this situation. Anyway he wants me to help out until he can find another spark to work on site.
Hi Guys, thanks for your feedback as always, but I haven't done any of the work on this install. This is just me walking around having a visual inspection of what has been done so far on the request of my friends uncle, as he has had a falling out with the sparkys who did all the work so far.
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.