lights

Recent contents Top users
  1. I

    CDA ECP62SS/2 extractor fan lights

    I've got a CDA ECP62SS/2 extractor fan, can anybody tell me how to remove the lights so I can change the bulb. Also what type of bulb is used in this model. Thank you
  2. G

    Spot lights gu 10 240v

    I have 9 spot lights in kitchen gu10 running 240v and 4 have stopped working. I have gone in the loft and they seem to be in two loops one with 5 on and one with 4 on both comming from junction box as pictured. There are 2 wires comming in to the box as pictured. Only the 5 one has power but the...
  3. Richardcavell

    Am I buying the right lights?

    Hi. 1. I want to install a light for the tiny foyer of my apartment. I’m thinking of installing it on the wall. Does this one look good? Also, how does it install? Do I need to buy anything else? The first video is of my foyer. Cloud Satin Copper effect Ceiling light | DIY at B&Q -...
  4. RagingGinger96

    flickering lights/ burning wire smell

    Figure I'd ask here for advice. House was built in the 70s. Recently I was running the dishwasher and noticed the lights in the kitchen flicker and smelled a burning wire smell. So I stopped the dishwasher but the lights continued to flicker for a while. I've narrowed the flickering down to the...
  5. N

    Quinetic & flood lights

    Afternoon all I’ve just hooked up a couple of quinetic switches (one being the in line built-in receiver, QURS1W) to a (Vtac) 50w LED floodlight and part of the array remains dimly lit when it is switched off. Now it more than meets the minimum wattage (5w) so i’m assuming it’s a simple...
  6. B

    LED Strip Ceiling Lights

    Hi All, I am redecorating my bedroom and would like to create that LED strip lighting effect as uplighters from the coving. That is probably not the technical term, but sure you know what I mean (see attached picture as rough examples of what I am trying to re-create). And yes, I know it is a...
  7. S

    Bane of my life new wall lights

    I posted last week regarding a lighting cable being too short in the wall to reach my new light fittings.this is still annoying me lol, I will try and elaborate further , my dad was a retired electrician he passed away just under 3 yrs ago , when he fitted these wall lights it was before the new...
  8. nickjett

    Help with fitting lights

    Ok this has probably been asked before..so im sorry but im really struggling. Im not an electrician by the way lol Im trying to fit two new light fittings in the kitchen. Ill name them kitche 1 and Kitchen 2 I managed to get the Kitchen 1 working..it took a while of trial and error. I dont...
  9. S

    Wiring lights on exposed beam in flex

    Hi all, I'd like to replace some MR16 halogen fittings on an exposed wooden beam to new GU10 fittings which I will be fitting led lamps into. The current fittings are wired in 2 core flex as they're only 12v, can't see a problem with that. For the new lights I'm planning on using black 3 core...
  10. Mypyh4ooo

    Daisy chain garden spike lights

    Hi all, I am after some help in regards to the below. I have had my garden lights in for around 2 years now and working without any issues. There are 6 spike lights wired to a 3 pin plug each and plugged into an extension lead within a weatherproof outdoor box. The extension lead is then...
  11. J

    Two 3 way switches, 1 reg, too many "extra" wires and zero working kitchen lights. (Picture Inside)

    Hey guys. Embarrassed to say but I've been living here for almost 5 years now and I've never had my kitchen lights working properly. Can someone possibly help me with some advice to wire these in properly? The other day I switched out all my old plug in outlets and light switches for new...
  12. acursi15

    Instrument cluster lights not working

    My 2003 Toyota Echo has two back lights in the instrument cluster. One of the lights would flicker if I hit a bump or something. I swapped the lights, meaning I put the bad light in the good light's place and vice versa, to help determine if it was an issue with the bulb or something else. The...
  13. K

    Attic box: 2 white wires and 1 black connecte/2 black wires connected: install recessed lights

    I am installing recessed lighting on a 3 way switch but neither one of the switches has a red wire. Initially I was going to try to hook up the lights to an outlet that the switches control, but it only has 1 black and 1 white wire. So when I went to the attic to try an hook up the recessed...
    • Kevi376
    • Thread
    • attic black box connected install lights recessed screwfix white wires
    • Replies: 3
    • Forum: UK Electrical Forum
  14. B

    Ceiling fixture has only 2 out of 3 lights working

    Hi, I have replaced my ceiling fixture. The previous one had one light bulb and now I have put one that has 3 light bulbs. The problem that I have is that only 2 light bulbs are working. It was one light previously but since I have replaced the switch I've miraculously got 2 out of 3 working...
  15. F

    Wiring lights neutral

    Hello folks I am attempting to wire some new Down-lights in my new house , I have wired a few sets up before in previous home however the cables going into my ceiling rose seem to be missing live cables and not like the standard Twin & earth i have connected before . I can see that there is a...
  16. C

    Dimmer switch for LED lights.

    I’m looking for a dimmer switch that works well with Sylvania’s 61405 LED wafer lights. Only two lights on the switch. I installed the switch in the picture, and it did nothing. Thanks for your input.
    • cey146
    • Thread
    • dimmer dimmer switch led led light led lights lights screwfix switch
    • Replies: 10
    • Forum: UK Electrical Forum
  17. O

    UK Correct lights to go into MDF shelving?

    Hey guys! I'm a bit curious the correct lighting to fit recessed in some MDF shelving. I've fitted normal spotlights before with relative ease, although I'm cautious as I will only have a 6cm gap and obviously the material is combustible. Anyone recommend anything? Cheers :)
  18. timhoward

    Emergency Lights are starting to really annoy me

    A slight rant. Having just finished a spate of commercial EICRs I really can't understand why we tolerate these wretched things: 1 - I now expect there not to be a continuous CPC on emergency lighting circuits. The odds of someone losing the fight with the spring-loaded twin-terminal and...
  19. D

    Why do my led lights glow when turned off

    I have 13 LED lights that glow all night. They are on two separate breakers
  20. Masonr15

    Cigarette port lights

    If I have two caution lights for my car that are powered by the cigarette port on my car and I leave them on when I turn my car off how long till my battery dies.

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

Tags

advice aus cable circuit course earth electric electrical electrician hello led light lighting lights looking new please question rcd socket supply switch testing training wiring
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock