2 way circuit diagram

[bonio78]

how do, we have been asked to do a 2 way circuit diagram for an assesment at college, does this drawing look right? ( hopefully i can upload the pic )


cheers for any help

 

[wallyanker]

You don't link the 2 commons together, one common is live in and the other common should be live to the light fitting.

L1 links to L1
L2 links to L2

Dont forget to have an earth at the light fitting too.

Hope this helps

 

[mogga]

your live feed from mains to the Loop Loop to Common on first switch L1 and L2 on both switches Linked ( strappers or Pass wires ) depends where you live what they are called Common from switch number 2 to the Sw Live on the light fitting neutral to neutral

you have connected the live feed to the swlive at the fitting and the commons shouldnt be linked as your diagram shows Hope this helps

 

[JulianC]

On your diagram, take the connection from loop to common, remove it from the common and attach it to L2. Job's a good'un.

 

[Paulj122]

does it not depend on whether its in twin and earth or single core?

 

[dpiers1980]

You would do switch live to L1 and common to L2 from ceiling rose then from switch 1 to switch two three core and earth would be used and then connect L1 to L1 and L2 to L2 then common to common and your earth is connected in backbox you would do it like this in twin and earth no crimping done at all. My dad showed me this he has 50+ years experience and my tutor did not even know this he had us crimping. I don't understand how people are saying you can't link the commons ?

 

[dpiers1980]

- - - Updated - - -

 

[dpiers1980]

warning hotlinking is theft grow up as if a billion people around the would are'nt doing it

 

[kingeri]

Maybe after over 2 years he managed to fathom it out.?

 

[rmc86uk]

This is also how I was taught to wire and connect a two way lighting circuit. Link commons together and permanent live to L1 and switch live to L2.

Sent from my GT-I9300 using Tapatalk 2