3 gang, 1 way, 1 dimmer 2 on/off switches

[DanUK]

Hi all. I hope you can help please.

Does this exist? I’m struggling to find anything matching this. I have a 3 way switch in my living room. One controls a ceiling light, another controls 6 spotlights, the other controls another ceiling light.

Is it possible to get a 3 gang, 1 way single plate switch with 1 dimmer and 2 on/off switches?

Thanks for any help!

 

[Rpa07]

It’ll be done with grid switches in a face plate. Click or MK you’ll be able to make up that 3 gang. Make it a 35mm backbox it sits in though. Ask a wholesaler to help you out.

 

[Jamie']

You will have to buy it in grid format so a 3 gang yolk, 3 gang faceplate, 1 dimmer insert and 2 1 gang 1way switches.

 

[Rpa07]

Beat you @Jamie' - now get to bed!

 

[DanUK]

Fab, thank you! I was definitely Googling the wrong thing!

I’ve found these dimmable downlights - can you suggest a dimmer insert that would work with these?

Thanks for your help. Much appreciated!

Integral MR16 LED Bulbs GU5.3 4.6W 37W 4000K Cool White Dimmable Lamp 3 Pack New 5055788231080 | eBay - https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F292596381973

 

[telectrix]

scolmore click do interchangeable modules .
SCOLMORE GROUP - WIRING ACCESSORIES | CLICK MiniGrid, the fully interchangeable modules - https://www.scolmore.com/products/minigrid/

 

[Taylortwocities]

can you suggest a dimmer insert that would work with these?

One of THESE

 

[Rpa07]

If you haven’t the downlights yet, don’t go for transformers and GU 5.3 ( ;-) George Cooke)
But go for mains voltage - gives you more scope of lamps and less technology to ‘pop’ in the future.
GU 10 dimmsble lamps coupled with ‘Varilight’ Vpro grid or ZDano (expensive but excellent grid)

 

[Taylortwocities]

GU 10 dimmsble lamps coupled with ‘Varilight’ Vpro grid

See my link above in post #7

 

[Rpa07]

Sorry @Taylortwocities - sometimes I don’t click on links in case it takes me down the rabbit hole!
Careful now!

See my link above in post #7