6a fan isolater or 5a fused connection unit for bathroom fans

[baazab]

hi avery1 i notice few new houses got 5a fused connection unit controlling bath room fans,my q how do they do it if you have 3core cable +earth (timer fan) i always used (3polefan isolater l1 l2 N).:dozey:

 

[MDJ]

some humour here for you, des.

View attachment 21511

I may steal that picture for another thread LOL

 

[Redvanman]

Here's a thought
Why not wire all bathrooms including utility room fan on its own circuit with a 3 amp mcb and that does away with the stupid idea of a 3 amp fuse next to the fan isolator.

 

[MDJ]

The manufacturer should install a fused connector block inside the fan which several lighting companies do for their flourescent lights, this way there is no doubt the fan will be fused at 3 amp. But they won't because it is all Rollocks and they want to blame everyone and anyone else if their fan packs up.

 

[Des 56]

I may steal that picture for another thread LOL

I can't wait to see whats coming up

 

[Redvanman]

The manufacturer should install a fused connector block inside the fan which several lighting companies do for their flourescent lights, this way there is no doubt the fan will be fused at 3 amp. But they won't because it is all Rollocks and they want to blame everyone and anyone else if their fan packs up.

Plus it would have to be two fuses if it's timer and that would make the casing even bigger.
I find it hard to believe that the world will end as we know it if more than 3 amps flows through their fans and if it does then their fans must be pretty ****e which to be honest most are.

 

[telectrix]

answer is for them to fit a thermal link in the fan so if it seizes or shorts out, the link will open. so simple.

 

[Geordie Spark]

some humour here for you, des.

View attachment 21511

Where did you find that Tel ...... page 3 of Sheep Sh earers Weekly?

 

[Badged01]

Where did you find that Tel ...... page 3 of Sheep Sh earers Weekly?

I havent seen a **** mag like that for a long time .....

 

[MDJ]

That picture is from top shelf Magazines in most leading newsagents in Wales.

 

[Badged01]

I find it hard to believe that the world will end as we know it if more than 3 amps flows

It doesnt until something goes wrong and the lawyers get involved ........

 

[Silly Sausage]

I can't wait to see whats coming up

Pictures of erect penises will definitely be censored, so unfortunately the rest of us won't get to have the pleasure of admiring your morning glory Des.

 

[Badged01]

That picture is from top shelf Magazines in most leading newsagents in Wales.

Wish they would start stocking it in my local newsagents then .....

 

[D Skelton]

I wish I could find the reg which states motors need local isolation incase of emergency's like fire for example, it is there somewhere I had to show it to a customer once, I canny find it now and feel frustrated LOL

You won't find it because it doesn't exist, however 132.15.2 does state that every fixed electric motor shall be provided with an efficient means of switching off (not neccessarily isolation), readily accessible, easily operated and so placed as to prevent danger.

I would argue that readily accessible doesn't automatically mean local to the motor (although I would agree that 9/10 times it does) because motors aren't always operated from nearby or easily accessible in the first place.

It is one of many, what I like to call 'grey area' regulations. It relies on common sense really. Essentially if you shorten it down to its main key point and re-write it, regulation 132.15.2 should read something like; "Don't be a ---, make sure you can turn a motor off easily if you have to!".