atlas copco air comp

[hicham hicham]

hi guys hope all of you having a good time
my air compressor atlas copco GA11 FF is not running due to a fault a red light is in screen i try to reset many time but not gone
thanks for help

 

[Lucien Nunes]

Do you mean the general alarm LED is on? Any of a thousand things could be wrong. Is anything showing on the display? If so, have you looked it up in the user handbook? There are different sections you need to refer to, according to which control system is fitted (Elektronikon I or II).

 

[hicham hicham]

hi i want to reset but won't (electronikon 1) display showing a motor blinking

 

[Pete999]

hi i want to reset but won't (electronikon 1) display showing a motor blinking

Blinking Hell

 

[hicham hicham]

Blinking Hell

means?????

 

[Pete999]

means?????

 

[Pete999]

means?????

Nothing at all my attempt at humor

 

[rapparee]

We had a similar problem recently with an Atlas Copco compressor, the fan in the VSD wasn't working and was causing the thing to over heat, it wouldn't reset until after it cooled down.

Have you got a good quality air dryer on your system.

Another problem, could be that you have mechanical damage on the air-end. This could be terminal for the whole compressor as it is uneconomical to repair.

 

[hicham hicham]

We had a similar problem recently with an Atlas Copco compressor, the fan in the VSD wasn't working and was causing the thing to over heat, it wouldn't reset until after it cooled down.

Have you got a good quality air dryer on your system.

Another problem, could be that you have mechanical damage on the air-end. This could be terminal for the whole compressor as it is uneconomical to repair.

 

[rapparee]

So hicham.

How did you get on?