Battery Powered Programmable Room Stats

[topquark]

What cable do you guys run if you're newly installing a Battery Powered (no neutral reqd) Programmable Room Stat 6242 or 6243 (future proofing)?

Cheers
Martin

 

[topquark]

Done in 3 core as normal to enable programmer to be replaced with another stat that may require a neutral.

 

[robsparky1975]

only just noticed this one,and yeah id of done the same,spare core double up as cpc both ends.future proofed:winkiss:

 

[topquark]

Have to watch the pennies (10M run)

 

[robsparky1975]

lol use 1mm

 

[robsparky1975]

or even better as some donkeys have done 5 core flex run 10mtrs under floorboards,jokers:61:

 

[topquark]

or even better as some donkeys have done 5 core flex run 10mtrs under floorboards,jokers:61:

Arrghhh, no! I will be putting a (somewhat redundant) wiring centre in tomorrow, just so I can take some heat resistant flex into the boiler .... As my 16mm stat feed was a bit stiff (now you know why I was penny watching) pmsl