- Reaction score
- 1,650
Get a clamp meter on it then, cause it’s... poor connections/products, cheap as anything cable, 4mm cable or not a 8.5kW shower.
-
Please checkout the new poll we will be pushing hard, and want some good stories to come out of this
result are public - you can change your vote over time, which might genuinely be the case from time to time.
Discuss Burnt out 6mm on 8.5kw shower in the UK Electrical Forum area at ElectriciansForums.net
Reply to Burnt out 6mm on 8.5kw shower in the UK Electrical Forum area at ElectriciansForums.net
Similar Threads
Hello,
I'm not an electrician, more one of those 'competent DIYers', so probably the worst kind :)
My electric shower broke, the shower firm came...
Hello All. I'm quite new to this game and gaining experience, but going well in the main.
My customer wants to feed a Hob ( on island in centre...
Hi everyone.
Hopefully someone can help with a little mystery i had today. The issue is fixed but I want to understand what was going on to help...
Hi
We recently had an 7kW EV charger installed. Due to the consumer unit being situation within the kitchen of our bungalow, the cable needed to...
I own a top floor tenement flat that I used to live in and then rented out after I married. It is currently empty whilst some work is being done...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
YOUR Unread Posts
-
-
32 amp 3 phase socket, 300ma RCDThe potential issue I see is how is the installation in the portable shower block tested and the...
- Latest: UNG
-
Fitting bolt in fittingSome duct tape on the back of the plate to stop the bolt moving back or just epoxy resin the...
- Latest: UNG
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.