Discuss Changing storage heaters to electric radiators in the UK Electrical Forum area at ElectriciansForums.net

Reaction score
8
I've been asked to remove two storage heater and replace them for electric radiators. The storage heaters are on their own dedicated circuits protected by 16A mcb. There is no RCD protection. It is currently on E7 but the customer is planning to move to a single tariff.

I will change the storage heater socket to a fused spur socket but would I also need to change the mcb to an rcbo?

It cannot be used as a plug socket so I can't see that it would need to be protected by an rcd other than the fact that I cannot determine whether the cables are buried at a depth of more than 50mm.

Apologies if it seems like an obvious question but I am newly qualified and want to know I've got it right.
 
For a storage heater to contain asbestos it would have to be over 40 years old as manufacturing removed use of asbestos containing materials in 1973/4.
 
For a storage heater to contain asbestos it would have to be over 40 years old as manufacturing removed use of asbestos containing materials in 1973/4.

That's weird, any idea as to why they stopped in 1974?
Legal bans on various forms of asbestos didn't start until the 80's and the final total ban didn't happen until 1999, so i assume there was another reason to stop using it in storage heater bricks?
 
That's weird, any idea as to why they stopped in 1974?
Legal bans on various forms of asbestos didn't start until the 80's and the final total ban didn't happen until 1999, so i assume there was another reason to stop using it in storage heater bricks?
No idea I know various restrictions have been imposed over the years and as you say a total ban didn't happen until 1999/2000 and that probably will surprise many people.
 
Apparently as early as the 1970s Dimplex realised that by removing the asbestos the 'heaters' could perform even worse; so they did it!
 

Reply to Changing storage heaters to electric radiators in the UK Electrical Forum area at ElectriciansForums.net

Similar Threads

I've a 3 phase storage heater currently wired to the main fuse box in an office I have. The heater has 2 supplies/isolators, 1 for charging at...
Replies
0
Views
847
Been round to a house to quote to replace some storage heaters for new panel heaters and came across a strange (to me at least) way of wiring the...
Replies
23
Views
4K
I get asked quite a lot about replacing old storage heaters with something more economical and I don't know what to recommend. Some people ask for...
Replies
9
Views
2K
Until last week I had a dual tariff electricity supply with a cheaper overnight tariff. This was good for the storage heating, but now the storage...
Replies
2
Views
2K
I own a top floor tenement flat that I used to live in and then rented out after I married. It is currently empty whilst some work is being done...
Replies
0
Views
160

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

Electrical Forum

Welcome to the Electrical Forum at ElectriciansForums.net. The friendliest electrical forum online. General electrical questions and answers can be found in the electrical forum.
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock