Discuss Converting from PME to TT in the Australia area at ElectriciansForums.net
Hi All, I just want to check if there are any restrictions or special requirements, other than adequate RCD protection, when converting a domestic PME(TNCS) installation to TT? The convertion will either be to the whole installatioin or to just part of it. The reason for the alteration is the customer wants to restart his amateur radio hobby. I've found part of an article, see here ->
http://www.fareham-darc.co.uk/killing_ground2.pdf
Reply to Converting from PME to TT in the Australia area at ElectriciansForums.net
Hi guys I was recently ask by a customer if/how his house could be supplied by his electric car. He wants to charge the car at night on low rate...
At a house today fitting yet another car charger.
Straightforward install apart from fuse holder having a crack in it.
Called SSEN who sent an...
Morning All
I recently completed my first re wire and board change, (with help from the owner who is a gas fitter and plumper, who works with my...
Somewhere along the line I picked up a suggestion from a forum posting or two that the DNO does not like you to connect an earthing rod to his...
So I have been asked to look at a job which includes providing 2 submains (one for a small dwelling, the other for a small workshop/garage). The...