- Reaction score
- 244
That's a useful point but gonna confuse the CEF lads completely when I ask
Search the forum,
Discuss "decent" generic Fuse Board circuit labels in the UK Electrical Forum area at ElectriciansForums.net
- Reaction score
- 4,385
Reply to "decent" generic Fuse Board circuit labels in the UK Electrical Forum area at ElectriciansForums.net
Similar Threads
Been asked to move, remove and add some sockets the kitchen and I’ll need to add a circuit for an electric hob.
Looked at the board and it’s one...
Anyone come across this before? I was asked to do a Zs on a 3ph surge device; L1 was around 6 ohm, L2 & L3 around 0.11. Wired in singles from a...
I'm after advice on how best and safely to do a friends Fuseboard upgrade.
Current setup is a Wylex 6 Way board with MCBs of 2x 6A, 2x 32A and 30A...
Hi guys
I have some industrial lighting circuits to wire in a workshop and was after some fresh ideas/suggestions as to how i could best do this...
Hi all,
Been asked to quote an EICR on a fairly large installation.
Approx. 400 circuits that are a mixture of single and 3 phase.
This is across...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
YOUR Unread Posts
-
What is it called IR testing?When testing yes, but sometimes useful to disconnect them when fault finding.- Latest: DPG
-
Installing an energy meter on a ring mainYep, figured as much. Thank you for the reply!
- Latest: babyshanks
-
Delete your own account - whenever you want toYou want to leave you are a very active member?- Latest: westward10
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.