Discuss Dno in the Australia area at ElectriciansForums.net

Reaction score
0
Some guidance please..........I have asked EDF to restore the supply to a small shop where the basement is flooded and some circuits may well be wet. From the DNOs intake there is a distribution circuit to the distribution board complete with 80Amp semi enclosed fuse and 2pole cutout. This circuit is open and the fuse pulled

Question is what will they require from me before restoring there supply:confused:
 
Some guidance please..........I have asked EDF to restore the supply to a small shop where the basement is flooded and some circuits may well be wet. From the DNOs intake there is a distribution circuit to the distribution board complete with 80Amp semi enclosed fuse and 2pole cutout. This circuit is open and the fuse pulled

Question is what will they require from me before restoring there supply:confused:
If it's flooded, I doubt thaye'll re-connect anyway......Brave man that tries!...Happy days!
 
DNO......Hmmmmmm...Funny buggers in my experience, you'll prob get some clueless bod pop round, scratch his head, then say something like......"I can't do that, I'm only trained for such en such....you'll have to ring up and book another appointment"

I guess as long as the circuits effected (basement) are disconnected at source with no means of reconnecting, and all other levels are not effected by any water nor are likely to be, then I would of thought it should be ok, but then again the DNO is the DNO...Blah blah they'll prob isolate the entire street!

P.S This advice is based purely on speculation and heresay, please do not try this at home, and if you do, get someone else to do it while you stand a safe distance away and watch from behind a kevlar reinforced partition wearing 100% rubber boots, and using stilts for safe measure.
 
He may want a PIR or installation cert to show the part he is energising is safe to energise. At one time the DNOs had their own testers who would test the installation before energising a property.
 
had a simmilar one recently dno insisted on a cert to say ok to reconnect bit stupid as there was no power to carry out testing, did a part pir covering the dead testing side and gave the client that the dno fitted fuse and i returned later to complete the pir.
 

Reply to Dno in the Australia area at ElectriciansForums.net

Similar Threads

Apologies if this is in the wrong section - appreciate it's more of an educational question. That said I have 2391 - but the classroom environment...
Replies
2
Views
2K
Hi Have done some additions to an existing multibuilding non domestic site. I noticed no SPD on the mains intake side, they are in a reasonably...
Replies
13
Views
2K
Got a customer with a 3 phase looped cut out. Only use one of the phases and there is likely a second fuse on the adjacent holder/phase. I have...
Replies
8
Views
2K
I highlighted the condition of an installation several months ago to a client. In short there is a basement which is very wet and the board...
Replies
15
Views
2K
Toneyz
T
K
Hi, first post so please accept my apologies for going straight in with a question. Sorry if this is a bit long winded but I thought knowing the...
Replies
4
Views
2K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock