Dual Tariff or dual RCD

[Gareth Brookes]

Perhaps I'm mistaken, but the main isolator on the RH end no longer isolates the board? And I won't mention that G/Y has had a trim up ...

Yeah you are defo right there I will defo bring this up with the firm I work for.

 

[buzzlightyear]

Yeah you are defo right there I will defo bring this up with the firm I work for.

yeah ,take your self in a corner and tell your self off.

 

[ruston]

Perhaps I'm mistaken, but the main isolator on the RH end no longer isolates the board? And I won't mention that G/Y has had a trim up ...

Certainly looks that way .

 

[westward10]

Yeah you are defo right there I will defo bring this up with the firm I work for.

You also should mention

● Conductors not enclosed into the dist board.
● Correct identification of the swa conductors.
● The yellow conductor is oversized to enable suitable termination at the earth bar and hence strands have been cut away.
● Generally all conductors are poorly terminated especially the secondary neutral at the main switch.
● The consumer unit has been altered beyond manufacturers recommendations.

 

[buzzlightyear]

● Conductors not enclosed into the dist board.
● Correct identification of the swa conductors.
● The yellow conductor is oversized to enable suitable termination at the earth bar and hence strands have been cut away.
● Generally all conductors are poorly terminated especially the secondary neutral at the main switch.
● The consumer unit has been altered beyond manufacturers recommendations.

and I may has well put ,that neutral to the rcd side to the s/heaters not marked up for the line .I have seen a lot like that .