- Reaction score
- 634
So I go and install a new socket circuit this week in an industrial warehouse. The job is straight forward enough. Surface mounted metal socket outlet fed using a short run of swa from a local db board. Anyhow just before I began testing the new circuit I asked the maintenance spark if he had any previous Reports/schedules or test results for the db board. He looked at me with a vacant stare then asked "what for? We don't do any testing we don't need to, that's what Mike told us" (Mike being the maintenance & health and safety manager). This warehouse is a busy environment, full of packers and pickers. I noticed quite a few issues with the existing installation as it is dated and ideally requires some rectification.
How would you good folk go about this situation? I would like to raise my concerns, but this is a new client and I would like to build a relationship with the maintenance guys who I may have to work along side of on future projects.
How would you good folk go about this situation? I would like to raise my concerns, but this is a new client and I would like to build a relationship with the maintenance guys who I may have to work along side of on future projects.