Discuss Electric shower fitted on the wrong end of bath. in the Periodic Inspection Reporting & Certification area at ElectriciansForums.net

Reaction score
8
Hi all,
Recently did an Eicr. I failed it due to shower being fitted on the opp side to the taps. I was lead to belive it was a C2 fault. Unable to find anything in the regs. Building or 18th. Its a rented property with a tight arse landlord who's asked his mates and come to the conclusion that he doesn't have to move it. Any feed back with relevant regs would be helpful. Cheers Kellogs
 
Surely a wind up. Hope it’s not serious, there is a real business of that name in … let’s not be specific …but I’ll call it Essex.
 
being fitted on the opp side to the taps. I was lead to belive it was a C2 fault. Unable to find anything in the regs. Building or 18th. Its a rented property with a tight arse landlord who's asked his mates and come to the conclusion that he doesn't have to move it. Any feed back with relevant regs would be helpful. Cheers Kellogs
Could the taps not be moved to the shower head
I would put c1 for the hole to be in the correct position.
 
I am afraid your lack of knowledge of plumbing regulations is showing. The real problem is the bath has been plumbed in the wrong way around. So it really does not come within BS7671 etc. So no code.
 
This can't be real, there is looking for problems and the there is..... this when the only problem appears to be the guy producing the EICR
I find it rather worrying that with all the talk of what is deemed competent to carry out EICR's somebody would post this question
Not really a good advert for the OP especially with their business name in their profile
 
It’s C1, C2, C3 for things actually checked and be coded.

FI for Further Investigation

NV for not verified. Means it’s there, but I couldn’t physically test it / couldn’t be bothered.

NA no applicable. It’s not there to be tested.
 
FWIW, the last electric shower I fitted was to a double-ended bath where the taps were in the middle, so I had a choice of 2 walls to fit the shower to...but in the end, I fitted an instant electric shower to one end and another one, off the combi boiler, to the other end.
I couldn't fit any shower above the taps because there wasn't a wall there, just a window.
 
The numpties haven't fitted the shower in one of the zones have they? Then yes, it's a C2. Everyone knows water and leccy don't mix. Shower should be at least 600mm away from the end of the bath or preferably on the landing.
 
Absolutely not. The cubicle is to keep the water off the electrical equipment. Would you suggest fitting a shower head in a switchroom? I think not. Musical Differential Inflammation or whatever it's called.

BTW I can't believe you gave me a thumbs-down for post 24... you've upped my neg rep by 20% in one hit!
 
Absolutely not. The cubicle is to keep the water off the electrical equipment. Would you suggest fitting a shower head in a switchroom? I think not. Musical Differential Inflammation or whatever it's called.

BTW I can't believe you gave me a thumbs-down for post 24... you've upped my neg rep by 20% in one hit!

I think your reputation will survive this little dent!!
 

Reply to Electric shower fitted on the wrong end of bath. in the Periodic Inspection Reporting & Certification area at ElectriciansForums.net

Similar Threads

Hi, We are renting and have a electric shower downstairs (extension) - a 9.5kW Triton T80Z fast-fit electric shower as well as a combi boiler...
Replies
34
Views
4K
A relative recently had an electrical certification done on a rented property. The property was build in 2005 and had previously passed 3...
Replies
25
Views
3K
Hi. I'm being tasked with installing an electric shower into a property that was built back in the 1980's. The main consumer unit has only 4 ways...
Replies
2
Views
1K
I own a top floor tenement flat that I used to live in and then rented out after I married. It is currently empty whilst some work is being done...
Replies
0
Views
217
Evening all. Doing a EICR in a rental today and presented with this. installation date is 1992 and there seems to be no records since. At some...
Replies
9
Views
11K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock